HPE7-A06 Exam Simulator Free - HPE7-A06 PDF Download

Our HPE7-A06 exam questions have three versions: the PDF, Software and APP online. Also, there will have no extra restrictions to your learning because different versions have different merits. All in all, you will not be forced to buy all versions of our HPE7-A06 Study Materials. You have the final right to select. Please consider our HPE7-A06 learning quiz carefully and you will get a beautiful future with its help.

Are you struggling to prepare HP certification HPE7-A06 exam? Do you want to achieve the goal of passing HP certification HPE7-A06 exam as soon as possible? You can choose the training materials provided by Real4dumps. If you choose Real4dumps, passing HP Certification HPE7-A06 Exam is no longer a dream.

>> HPE7-A06 Exam Simulator Free <<

Hot HPE7-A06 Exam Simulator Free - How to Prepare for HP HPE7-A06 Exam

Key Features of HPE Campus Access Switching Expert Written Exam Updated Practice Material! The HPE Campus Access Switching Expert Written Exam practice material comes with multiple unique features. These features make your HP Exam HPE Campus Access Switching Expert Written Exam test preparation process simple and quick. The top listed features of HPE7-A06 study material are actual test questions, free demo facility, three months of free HPE Campus Access Switching Expert Written Exam test questions updates, affordable rate, and a full satisfaction guarantee. Our HPE Campus Access Switching Expert Written Exam test preparation material comes in HPE7-A06 PDF, HPE7-A06 desktop practice test software, and web-based HPE7-A06 practice exam.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q47-Q52):

NEW QUESTION # 47
Ever since a recent firewall change at your WAN/lnternet edge, the 8GP state in your VSX pair has not returned to Established. What should you check to restore BGP functionality at the site?

A. Confirm that appropriate TCP ports are still allowed.
B. Restart NAT service for the BGP interface.
C. Restart the routing service so thatBGP auto-discovers its neighbors.
D. Confirm that BGP Peer AS has not changed.

Answer: A

Explanation:
The BGP state on a VSX pair is stuck (not 'Established') after a recent firewall change at the WAN/Internet edge, where the BGP peering likely occurs.
* BGP and Firewalls:BGP establishes sessions usingTCP port 179. Firewalls located between BGP peers must explicitly permit TCP port 179 traffic bidirectionally for the peering to establish and maintain. Firewall changes are a frequent cause of broken BGP sessions.
* Troubleshooting Steps After Firewall Change:The most logical first step is to verify that the firewall change did not inadvertently block TCP port 179 between the configured BGP neighbor IP addresses.
* Analysis of Options:
* A: Restarting routing service is disruptive and not the first step.
* B: Confirming that appropriate TCP ports (specifically 179) are still allowed through the firewall directly addresses the most probable cause related to the firewall change event.
* C: Restarting NAT service is likely irrelevant unless NAT is incorrectly configured for BGP peers.
* D: Confirming the peer AS is a basic configuration check but less likely related to thefirewall changeevent than port blocking.
* Conclusion:Given the problem occurred immediately following a firewall change, verifying that the firewall still permits TCP port 179 between the BGP peers is the most direct and likely troubleshooting step.
References:BGP protocol specifications (RFC 4271), Firewall management principles, Network troubleshooting methodology. This relates to "Routing" (16%), "Security" (10%), and "Troubleshooting" (10%) objectives.

NEW QUESTION # 48
Youare configuring an HPE Aruba NetworkingGateway Ouster with AOS-10. What is true about 802.1 X functionality incombination with gateways? (Select two.)

A. Users onL3-oonnoctod gateways need to perform a full authentication after re-association on theAP.
B. The gateways actasRADIUS Proxy only in Tunnel and Bridged Mode.
C. The UDG remains fixed on L2-connected gateways but not on 1.3-connected gateways.
D. The gateways areused as a RADIUS proxy, while the AP is theauthenticator.
E. Regardless of using gateways, the CoA message is always sent to the APs.

Answer: C,D

Explanation:
This question asks about 802.1X functionality in an AOS-10 environment involving Gateway Clusters.
* AOS-10 Gateway/802.1X Architecture:
* Authenticator:The Access Point (AP) typically acts as the 802.1X authenticator, handling EAPoL frames with the client.
* RADIUS Proxy:The Gateway Cluster (specifically the cluster leader or UDG anchor) often acts as a RADIUS proxy, forwarding RADIUS messages between the APs and the central RADIUS server (e.g., ClearPass). This simplifies RADIUS configuration as the server only needs to know about the gateway cluster.
* CoA:Change of Authorization messages from the RADIUS server are typically sent to the device acting as the RADIUS client, which is the Gateway Cluster when operating in proxy mode.
* Mobility (L2 vs L3):Roaming behavior and User Designated Gateway (UDG) assignment can differ based on whether clients maintain their IP address (L2 mobility) or potentially require new IP information (L3 mobility). L2-connected gateway deployments generally allow for more seamless UDG persistence compared to L3-connected deployments where the client might roam across subnet boundaries managed by different gateways.
* Re-authentication:Seamless roaming mechanisms aim to minimize full re-authentications during roaming events.
* Analysis of Options:
* A: Full re-authentication after re-association on L3-connected gateways might occur in some scenarios but contradicts the goal of seamless roaming.
* B: States the UDG remains fixed on L2-connected but not on L3-connected gateways. This aligns with the architectural differences in handling mobility across L2 vs L3 boundaries within a cluster.
* C: Incorrect. CoA is generally sent to the RADIUS client/proxy (the Gateway Cluster), not always directly to the APs.
* D: Correct. Gateways commonly act as a RADIUS proxy, while the AP remains the authenticator handling EAPoL with the client.
* E: Incorrect. The RADIUS proxy function is not limited to only Tunnel and Bridged modes.
* Conclusion:Options B and D accurately describe common characteristics of 802.1X operation within an AOS-10 Gateway Cluster architecture.
References:Aruba AOS-10 documentation (Gateway Clusters, User-Based Tunneling, 802.1X/RADIUS interaction, L2/L3 Mobility). This relates to "Authentication/Authorization" (9%), "Connectivity" (9%), and
"WLAN" (9%) objectives.

NEW QUESTION # 49
The user's device is failing 802.1 Xwith EAP-TLS authentication. We know that theclient-side certificate is valid. What is the likely cause of this issue? (Select two.)

A. There Is an EAP-type mismatch.
B. There is a problem with the ACL applied to the switch port
C. The NAD is not able to communicate with DNS servers.
D. The user's device is not configured to use the correct gateway.
E. The user's device is using the wrong MAC address

Answer: A,C

Explanation:
The user's device fails 802.1X EAP-TLS authentication, but the client-side certificate is known to be valid.
We need two likely causes.
* EAP-TLS Process:Involves mutual certificate validation and TLS handshake between client and RADIUS server (proxied by NAD).
* Causes (Client Cert OK):
* Server Certificate Issues: Client doesn't trust server cert (Untrusted CA, name mismatch, expired).
* EAP Type Mismatch:Client supplicant configured for different EAP type than RADIUS server policy.
* RADIUS Server Issues:Policy misconfiguration, user not found, internal errors.
* NAD <-> RADIUS Communication Failure:Switch cannot reach RADIUS server (IP connectivity, firewall, routing), incorrect shared secret.
* Client Supplicant Misconfiguration:Incorrect identity, settings other than the certificate itself.
* Network packet loss.
* Analysis of Options (Select Two):
* A: Wrong gateway affects L3 post-authentication.
* B: ACL blocking EAPoL/RADIUS is possible but less common than config errors.
* C:EAP-type mismatch:A very common configuration error leading to failure.
* D: Wrong MAC address is irrelevant for EAP-TLS failure itself.
* E: NAD not able to communicate with DNS servers: DNS isn't directly involved in EAP-TLS.
However, if interpreted more broadly asNAD not able to communicate with the RADIUS server(due to IP routing, firewall, or incorrect server address), this is a very common cause of failure.
* Conclusion:An EAP-type mismatch (C) is a prime suspect when basic certificate validity is assumed.
Failure of the Network Access Device (NAD - the switch) to communicate with the RADIUS server (E, interpreted broadly as RADIUS reachability) is another major category of failure causes.
References:EAP-TLS (RFC 5216), 802.1X Troubleshooting Guides, ClearPass Documentation. This relates to "Troubleshooting" (10%), "Security" (10%), and "Authentication/Authorization" (9%).

NEW QUESTION # 50
An administrator is monitoringthird-party WLAN transmitters m HPE Aruba Networking Central and some of them are classified as rogue and suspected rogue How aresuspected rogues classified when using the default classification method for the rule "Suspected AP On-Prem" in HPE Aruba Networking Central?

A. signal level = "-50 dbM" ANDWLAN classification = "On Wire"
B. signal level ="-50 dbM" AND WLAN classification = "Interfering"
C. signal level = '-65 dbM- AND WLAN classification ="On-Prem"
D. signal level = "-55 dbM" AND WLAN classification =''Interfering"

Answer: C

Explanation:
The question asks how suspected rogue APs are classified using the default classification method for the
"Suspected AP On-Prem" rule in HPE Aruba Networking Central.
* Analysis of Options:
* Option A:Correct. Suspected rogues are classified with a signal level of -65 dBm (indicating proximity) and WLAN classification of "On-Prem" (indicating they are on the premises).
* Option B:Incorrect. A signal level of -55 dBm is too strong, and "Interfering" is not specific to on-premises rogues.
* Option C:Incorrect. A signal level of -50 dBm is even stronger, and "Interfering" is incorrect.
* Option D:Incorrect. "On Wire" classification applies to wired rogue detection, not wireless on- premises APs.
* Why Option A is Correct:In HPE Aruba Networking Central, the "Suspected AP On-Prem" rule identifies rogue APs based on their signal strength and location. A signal level of -65 dBm indicates the AP is close enough to be on the premises, and the "On-Prem" classification confirms it's detected within the managed network's environment. This default rule helps identify potential security threats by flagging unauthorized APs with moderate to strong signals, distinguishing them from interfering or distant APs, as per Aruba's wireless security framework.
* Relevance to Certification Objectives:
* WLAN (9%):Designing and troubleshooting RF attributes and wireless security functions.
* Security (10%):Troubleshooting and identifying rogue APs in customer networks.
* Troubleshooting (10%):Analyzing wireless issues using Aruba Central tools.
References:
HPE Aruba Networking Central User Guide: Rogue AP Detection and Classification.
HPE7-A06Study Guide: Covers wireless security and rogue AP management.
HPE Aruba Networking Technical Documentation: Wireless Security and Rogue Detection Best Practices.

NEW QUESTION # 51
Review the diagram and existing configuration of RouterA above. Which configuration changes are necessary to permit load balancing between RouterA and RouterB? (Selecttwo) Exhibit.

Answer: B,E

Explanation:
Analyze Topology and Existing Configuration:
* RouterA (AS 64500) peers with RouterB (AS 64512) using eBGP.
* Peering is configured between loopback interfaces (RouterA Lo0 10.3.0.3 to RouterB Lo0 10.255.0.12).
* Two parallel physical links connect the routers (10.255.102.0/30 and 10.255.102.4/30).
* RouterA has two static routes pointing to RouterB's loopback (10.255.0.12/32), one via each physical link's next hop (10.255.102.1 and 10.255.102.5). This provides reachability to the BGP peer address over both paths.
* RouterA's BGP config activates the neighbor 10.255.0.12 for IPv4 unicast but is missing key commands for stable loopback peering and load balancing.
Goal:Permit load balancing for traffic exchanged via BGP between RouterA and RouterB. This requires BGP ECMP (Equal Cost Multi-Path).
Requirements for eBGP ECMP over Loopbacks:
* Stable Peering:Peering must use loopback addresses. This requires:
* update-source loopback <id>: To source BGP TCP packets from the loopback IP.
* ebgp-multihop <ttl>: Because loopbacks are not directly connected (TTL > 1 needed).
* ECMP Enabled:BGP must be configured to allow multiple paths in the routing table. This requires:
* maximum-paths <n> (or maximum-paths ebgp <n>): To allow more than the default 1 path.
* Equal Paths:BGP must see multiple paths to thesameprefix learnedfrom RouterBthat are considered equal based on BGP path selection attributes (Weight, Local_Pref, AS_Path, Origin, MED, etc.). Since routes are learned from the same neighbor IP (RouterB's loopback), these attributes will likely be identical for routes learned via this peering. RouterA already has equal static routestothe BGP next hop (10.255.0.12).

NEW QUESTION # 52
......

As the rapid development of the world economy and intense competition in the international, the leading status of knowledge-based economy is established progressively. A lot of people are in pursuit of a good job, a HPE7-A06 certification, and a higher standard of life. It is very important for us to keep pace with the changeable world and update our knowledge if we want to get a good job, a higher standard of life and so on. First, we need to get a good HPE7-A06 Quiz prep. Because we only pass HPE7-A06 exam and get a certificate, we can have the chance to get a decent job and make more money.

HPE7-A06 PDF Download: https://www.real4dumps.com/HPE7-A06_examcollection.html

HP HPE7-A06 Exam Simulator Free They are available 24-hours for guidance and information on our exam products and it is free of cost, HP HPE7-A06 Exam Simulator Free This professionally designed desktop practice exam software is customizable, which helps you to adjust timings and questions of the mock tests, HP HPE7-A06 Exam Simulator Free Perhaps you plan to seek a high salary job.

So you want to first look at what Bill calls a missed opportunity HPE7-A06 matrix, How do you securely deliver a secret key to a confidant using insecure public lines of communication?

They are available 24-hours for guidance Relevant HPE7-A06 Answers and information on our exam products and it is free of cost, This professionallydesigned desktop practice exam software is Relevant HPE7-A06 Answers customizable, which helps you to adjust timings and questions of the mock tests.

HPE7-A06 – 100% Free Exam Simulator Free | Authoritative HPE Campus Access Switching Expert Written Exam PDF Download

Perhaps you plan to seek a high salary job, The Channel Partner Program HPE7-A06 HPE Campus Access Switching Expert Written Exam certification enables you to move ahead in your career later, So you can pass the test effortlessly.

0

Course Enrolled

0

Course Completed

Paul Fox Paul Fox

About me

HPE7-A06 Exam Simulator Free - HPE7-A06 PDF Download

Hot HPE7-A06 Exam Simulator Free - How to Prepare for HP HPE7-A06 Exam

HPE Campus Access Switching Expert Written Exam Sample Questions (Q47-Q52):

HPE7-A06 – 100% Free Exam Simulator Free | Authoritative HPE Campus Access Switching Expert Written Exam PDF Download

0

0

Sign in